Artex, Avionics, Avionics & Instruments, ELTs
ARTEX ME406 ELT WITH ROD ANTENNA
Part #: 455-6607 USA, 455-6607-INT
4556607USA
4556607INT
Call for price
CompararOverview
| The Artex ME-406 is a single output ELT. Two emergency frequencies (121.5 and 406.028 MHz) utilize the same RF output, requiring only one coax cable to connect to the new series of Artex single input antennas. The ELT automatically activates during a crash and transmits the standard swept tone on 121.5 MHz. Every 50 seconds for 440 milliseconds the 406 MHz transmitter turns on and transmits an encoded digital message to the Cospas/Sarsat satellite system.The mounting hardware for the ME-406 Series is compatible with all previous models of Artex 406 MHz, as well as the ELT200 Series, ACK, Pointer Model 3000 ELT and Narco ELT’s. Current owners of Artex 2-frequency ELT can re-use the remote switch in the cockpit as well as the wiring harness from the cockpit to the ELT thus greatly reducing installation costs. |
| Peso | 0.45 lbs |
|---|---|
| Dimensões | 14.54 × 21.25 × 11.5 in |
| Select Model: | For Usa, For International |
| Brands |
Specifications
- Operating Frequencies: 406 MHz ± 1 kHz Biphase L (16K0G1D), 121.5 MHz ± 6 KHz
- Output Power: 406 MHz: 5 W (440 ms / 50 sec) for 24 hours @ -20° C to +55° C, 121.5 MHz: 100 mW min for 50 hours @ -20° C to +55° C
- Output Connector: BNC Female
- Activation: ME406 – Automatic by 4.5 ft/sec (2.3 G), Primary G-Switch or Manual
- Battery: 5 year Lithium (LiMnO2)
- Temperature: Operating: -20° C to +55° C
- Storage: -55° C to +85° C
- Self Test: G-Switch enabled, 406 MHz Power, 121.5 MHz Power, Antenna/Coax Connection, Low Battery
- Remote Control: ON/ARM/RESET
- Antenna: ME406 for fixed wing applications; Rod (110-338) (< 350 KTS)
- Mounting Hardware: Mounting Tray P/N 452-3034
- ELT Transmitter Weight: 1.85 lbs (833 g)
- Mounting Tray Weight: 3.52 oz (100 g)
In The Box
- ME406 ELT w/ battery pack
- Mounting tray (attached to ELT when you pull it out of the box)
- Rod antenna (max airspeed 350 KIAS) four hole teardrop design
- Coaxial cable (6 ft) w/ BNC connectors attached
- Remote switch kit
- Install kit
- 15-pin mating d-sub connector
- D-sub connector housing
- Buzzer (install next to ELT within 6 in)
- Does not include: 11-06580 (wiring between the remote switch & ELT)
Replacement battery kit is 11-05277
Não há avaliações ainda.